Comet Labs 48-Port 10 Bedienungsanleitung PDF herunterladen (Seite 32)

2.4.2 Prepare Battery Module for Rack Mounting

IMPORTANT This step requires two people.

The Battery Module is very heavy (151 lbs.). To ease its rack mounting, you can remove the battery pack from the

Battery Module, as explained below.

Proceed as follows:

1. Unscrew the six screws securing front panel using Bezel hex driver .

2. Unscrew the brackets securing the battery connectors.

3. Disconnect Battery plugs.

4. Unscrew the brackets securing the battery pack. Remove battery bracket pack covers.

5. Pull the left and right battery packs out and set aside for reinstalling after the Battery Module cabinet has been

rack mounted.

6. Mount Battery Module cabinet on rack.

7. Re-install the battery pack in reverse order.

Figure 2-5: Accessing Battery Pack.

x 6

(not to scale)

EX 5/7/11 RT Systems

Installation2 — 6 86-86000-00 B01

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 75 76

Keine Kommentare

Comet Labs 48-Port 10 Bedienungsanleitung Seite 32